Anti-static fabric is to avoid the static electricity generated by clothing friction in some inflammable and explosive occasions is very dangerous, some work environment does not allow static interference, so do not allow the clothing to wear with the human body activity and produce harmful static electricity. aramid paper insulation factory Labor protection clothing and textile articles used in electronics, aviation, aerospace, petroleum, coal and other industries must have good electrostatic elimination function. The antistatic fabrics and functional textile articles developed in the market in recent years mainly include conductive metal filament embedded in the fabric at appropriate intervals, or add a certain proportion of metal staple fiber in the spinning process, and use metal as a good conductor of electricity to conduct and eliminate static electricity. The method of embedding conductive metal filament in the fabric is relatively simple aramid paper insulation factory
but the anti-static poly-card fabric produced by this process is often uneven because the metal filament attached to the outside of the yarn is exposed on the surface of the fabric, and the metal filament can not be stained with the dyeing of the fabric, so it seriously affects the dyeing and finishing effect of the fabric, resulting in all-cotton anti-static fabric and anti-static The unevenness of the color pattern of polyester card and CVC antistatic fabric is the defect that cannot be overcome in the dyeing process. In comparison, aramid paper insulation factory in the process of spinning, mixed with a certain proportion of staple metal fiber, under certain technological conditions, can make it fully and evenly mixed with ordinary fiber, to achieve the same color. The spinning and weaving process can keep the anti-static function for a long time and solve the problem of uneven dyeing of color flowers in the dyeing process. I plant for a customer to produce anti-static fabrics are all cotton anti-static yarn and anti-static polyester card is the use of the latter method of development and design. The customer requires that the garment made of this fabric can still reach the charge amount of 0.6uc/ piece after 100 times of washing, and the minimum content of metal fiber in the yarn must reach more than.3 lines. In order to meet the customer’s requirements, we design the content of metal fiber at 0.45%, and the spinning process ensures the uniform distribution of its ultra-low content. After trial production and testing, the anti-static performance of the fabric is better than the national standard GB/ 12014/09 “anti-static work clothes” index, our factory production of anti-static fabric can ensure the safety of customers.
Post time: Dec-10-2022